Garmin 300 - Removing the Cradle from the Mount; Removing the Unit and the Mount

Garmin © 2005–2006 57 nüvi Owner’s Manual
aPPendix
Removing the Unit and the Mount
1. To remove the unit from the mount, press the
tab on the bottom of the cradle up.
2. Lift the unit off of the mount.
3. To remove the suction cup from the
windshield, ip the lever toward you.
4. Pull the tab on the suction cup toward you.
Removing the Cradle from the Mount
To remove the cradle from the mount arm, turn the cradle to one
side. The cradle will snap off the ball socket.
To replace the cradle, snap the cradle on the ball socket.
➊
➋
➌
➍