Garmin Astro - Map Page Options

Astro Dog Tracking System Owner’s Manual 21
Map Page
Map Page Options
Use the Map page Options Menu to customize the Map
page. With the Map page open, press MENU > select an
option > press ENTER.
The following options are available:
Stop (Resume) Navigation—stops navigation and is
disabled when there is no active navigation.
Recalculate—recalculates an auto route and is
disabled when there is no active navigation.
Data Fields—opens the Show sub-menu so you can
select the number of data elds to show at the top of
the Map page: Map Only, 1 wide, 2 small, 3 (2 small
and 1 wide), or 4 data elds.
•
•
•
Change Data Fields—allows you to select the type
of data you want to show in the data elds. Available
only if the data elds option is being used.
Guidance Text—shows messages advising you of
your next move when navigating to a destination.
Setup Map—opens six pages of map display settings
so you can customize the map to your preferences.
Measure Distance (Stop Measuring)—measures the
distance from your location to the map pointer.
Turn Declutter On (Off)—eliminates the display of
items on the map that can block road details when the
map is zoomed out.
Restore Defaults—returns the map display to the
factory set defaults.
•
•
•
•
•
•