Changing a Parental Passcode on a SiriusXM Radio
Before you can change the passcode, the parental controls must be unlocked.
1 From the media screen, select Browse > Parental > Change PIN.
2 Enter your passcode and select Done.
3 Enter a new passcode.
4 Confirm the new passcode.
Restoring Default Parental Control Settings Values
This process deletes all the settings information you have entered. When you restore the parental control
settings to their default values, the passcode value is reset to 0000.
1 From the media menu, select Installation > Factory Defaults.
2 Select Yes.
Clearing All Locked Channels on a SiriusXM Radio
Before you can clear all locked channels, the parental controls must be unlocked.
1 From the media screen, select Browse > Parental > Clear All Locked.
2 Enter your passcode.
Setting the Device Name
1 From the media screen, select MENU > Installation > Set Device Name.
2 Enter a device name.
3 Select SELECT or Done.
Updating the Media Player Software
You can update the software on compatible connected stereos and accessories.
See the stereo Owner's Manual at support.garmin.com for instructions on updating the software.
Device Configuration
Turning On the Chartplotter Automatically
You can set the chartplotter to turn on automatically when the power is applied. Otherwise, you must turn on the
chartplotter by pressing .
Select Settings > System > Auto Power Up.
NOTE: When Auto Power Up is On, and the chartplotter is turned off using , and power is removed and
reapplied within less than two minutes, you may need to press to restart the chartplotter.
Device Configuration 95
To Next Page
Loading...
Need help?
General
