G1000 NXi System Maintenance Manual Page 2
King Air 300 Series Revision 1
190-00716-N1
EXAMPLE:
For a configuration that loaded “King Air B300 PT6A-60A”, the AIRFRAME section will display:
SERIES: B300
ENGINE: PT6A-60A
PROP: HARTZELL 4
Organization
The following outline briefly describes the organization of this manual:
Section 2: System Description
Provides a complete description of the type design change associated with installing the G1000
integrated cockpit system in the King Air 300 Series. An overview of the G1000 system
interface is also provided.
Section 3: Software and Configuration
Provides software and configuration loading instructions for a complete system software load.
Section 4: Instructions for Continued Airworthiness
Provides maintenance instructions for continued airworthiness of the G1000 system.
Section 5: Troubleshooting
Provides troubleshooting information to aid in diagnosing and resolving potential problems with
the G1000 system.
Section 6: Equipment Removal & Replacement
Gives instructions for the removal and replacement of G1000 equipment.
Section 7: Garmin G1000 LRU Replacement/Configuration & Testing
Gives instructions for loading software, configuring, and testing of G1000 equipment.
Section 8: Subsystem Functional Checks
Gives instructions for testing G1000 subsystems.
Section 9: G1000 System Return to Service Procedure
Specifies return-to-service procedures to be performed upon completion of maintenance of the
G1000 system.
To Next Page
Loading...
Need help?
General
