G1000 NXi System Maintenance Manual Page 371
King Air 300 Series Revision 1
190-00716-N1
Search and Rescue Functional Check
1. On the MFD, press the “FPL” key to display the Active Flight Plan Menu.
2. Press the “MENU” key to display the PAGE MENU Options.
3. Scroll through the choices with the FMS knob and select “Search and Rescue”.
4. Press “ENT” key to complete the selection and view the SAR flight plan menus.
5. From the Search and Rescue Menu, turn the large and small FMS knobs to enter the
starting waypoint.
6. Press ENT key to complete the selection and move to the next option, “PATTERN” type.
7. Use the FMS knob to move to the PATTERN type and select “PARALLEL”.
8. With the FMS knob scroll through the options and change the fields as desired, or leave
the default entries.
9. Press ENT key with the “ACTIVATE SAR?” field highlighted, to complete and activate
the flight plan.
10. Verify the parallel track search pattern is on the Map – Navigation Map page.
11. If no other service is to be performed, continue to the return-to-service checks in Section
9.
To Next Page
Loading...
Need help?
General
