Garmin GNS 430 - Page 147

GNS 430 Pilot’s Guide and Reference
8-7
SECTION 8
NRST PAGES
To quickly tune a VOR’s frequency from the
nearest VOR Page:
1) Select the nearest VOR Page, using the steps
outlined in Section 8.1.
2) P
ress the small right knob to activate the
cursor.
3) Turn the large right knob to scroll through the
list, highlighting the frequency associated with
the desired VOR (Figure 8-16).
4) Press the ENT Key to place the selected
frequency in the standby field of the VLOC
Window (Figure 8-17).
Figure 8-17 Move Frequency to Standby Field
5) Press the VLOC Flip-flop Key to activate the
selected frequency.
6) Press the small right knob to remove the
flashing cursor.
To view additional information for a nearby
VOR:
1) Select the nearest VOR Page, using the steps
outlined in Section 8.1.
2) P
ress the small right knob to activate the
cursor.
3) Turn the large right knob to scroll through the
list, highlighting the identifier of the desired
VOR (Figure 8-18).
Figure 8-18 Nearest VOR Page
4) Press the ENT Key to display the VOR Page for
the selected VOR.
5) To return to the nearest VOR Page, verify that
‘Done?’ is highlighted by the flashing cursor
and press the ENT Key (or press the CLR
Key).
6)
Press the small right knob to remove the
flashing cursor.