ORIUS™ User’s Guide Series Rev 3 I
Appendix 1
Hardware description
A1 System Requirements
To use the ORIUS™ CCD cameras, the following hardware and software systems are required:
Windows XP Professional
Minimum 512 MB RAM (1GB RAM preferred), 200GB, Hard-drive or better
Pentium 4 1Ghz or higher
Available microscope bottom port or 35mm port (If model is available)
Water and air connections
Gatan Microscopy Suite (GMS) software 1.7.1 or later
FireWire 800 also called 1394b capability (will run from 1394a but it is not recommend)
To Next Page
Loading...