Gate Titan User Guide

34
WWW.GATEE.EU
USER GUIDE
In order to update the Programming Card, follow the steps below:
Connect the Programming Card to USB-Link.
•
In the status bar you will see Device: PROGRAMMING CARD.
•
Cascade connection is forbidden (USB-Link->Tactical Programming Card->TITAN).
See diagram on page 33.
•
4.2.4 Tactical Programming Card: firmware update
You can also update the TITAN firmware to
the version which was downloaded on
your computer drive. Choose Manual, and
indicate the proper file. Click Upload.

Gate Titan Specifications

General

MOSFET	Yes
Battery protection	Yes
Trigger sensitivity adjustment	Yes
Pre-cocking	Yes
ROF control	Yes
Active brake	Yes
Diagnostic system	Yes
Programmable	Yes
Cycle Detection	Yes
Compatibility	V2 Gearbox
Low current consumption in sleep mode	0.2mA
Connectivity	USB-Link, Blu-Link
Fire Modes	Semi, Burst
Bluetooth support	Yes