44
WWW.GATEE.EU
USER GUIDE
5.3 Functions
5.3.1 Functions (A and B DISPLAYS OF the TActical Programming Card)
PRE-COCKING MODE
PRE-COCKING BOOST
BURST
IMPORTANT!
1. Switch to SAFE PRE-COCKING OFF
2. Switch to SEMI PRE-COCKING SMART
3. Switch to AUTO PRE-COCKING AUTO
BURST MODE
• OFF – PRE-COCKING is turned off. The full cycles are active.
• SMART – slow trigger action compresses the spring, and fast trigger action fires the shot.
• AUTO – the spring is automatically compressed after each shot.
It enables to determine the spring compression.
Pre-cocking mode can be switched via fire selector – you do not need to use Tactical
Programming Card or USB-Link. Switch the selector to SEMI and pull the trigger. After
firing the shot, while the trigger is still pulled, switch the selector:
After switching to the selected position, release the trigger. Every time you switch the
PRE-COCKING using selector, your action will be confirmed by long motor vibration.
Enables you to fire a pre-determined number of BBs. You can set: 2, 3, 4, 5, 8 or 10 shots.
There are two BURST operating modes:
• FULL – pulling the trigger results in firing a pre-determined number of BBs
• TRIG – releasing the trigger stops the BURST sequence
To Next Page
Loading...
