Gate Titan User Guide

43
WWW.GATEE.EU
USER GUIDE
All LEDs blink continuously
- TITAN is not connected
Display A
Display B
Diagnostic Trouble Codes Display
Sensors Display
Advanced Functions Display
ON OFF
OFF ON
ON ON
OFF OFF
BLINK BLINK
All LEDs blink three times -
default settings are restored
5.2.4 INDICATORS
The LEDs lines turn ON and OFF
line by line - it is necessary to
u pd a t e p ro g ra m m i n g c a r d
firmware
The LEDs turn sequentially one
by o n e - f i r m wa r e u p d a t e
progress bar

Gate Titan Specifications

General

MOSFET	Yes
Battery protection	Yes
Trigger sensitivity adjustment	Yes
Pre-cocking	Yes
ROF control	Yes
Active brake	Yes
Diagnostic system	Yes
Programmable	Yes
Cycle Detection	Yes
Compatibility	V2 Gearbox
Low current consumption in sleep mode	0.2mA
Connectivity	USB-Link, Blu-Link
Fire Modes	Semi, Burst
Bluetooth support	Yes