Gate Titan User Guide

37
WWW.GATEE.EU
USER GUIDE
4.4 SENSORS
GEAR TOOTH
FIRE SELECTOR
Shows the current selector position.
TRIGGER
TRIGGER SENSE
Please note that the information about sensors is very useful during the TITAN installation or
trigger sensitivity adjustment.
Shows the gear sensor's functioning. In case of the tooth detection, YES goes green. Detecting a gap
between teeth results in NO going green.
Enables to check trigger sensors (1-5). Some sensors may be active even if the trigger is released
(depending on the trigger model).
FIRE reflects the moment of firing a shot. It goes green when the trigger will reach the chosen trigger
sensitivity. Does not concern the AUG MODE.

Gate Titan Specifications

General

MOSFET	Yes
Battery protection	Yes
Trigger sensitivity adjustment	Yes
Pre-cocking	Yes
ROF control	Yes
Active brake	Yes
Diagnostic system	Yes
Programmable	Yes
Cycle Detection	Yes
Compatibility	V2 Gearbox
Low current consumption in sleep mode	0.2mA
Connectivity	USB-Link, Blu-Link
Fire Modes	Semi, Burst
Bluetooth support	Yes