Gate Titan User Guide

35
WWW.GATEE.EU
USER GUIDE
•
4.3 TITAN Drop-in Module Configuration
Each time you run the GATE Control Station App, the default configuration appears.
Click Read to check the current configuration.
ATTENTION:
Check availability of the newest firmware versions for the Tactical Programming Card
choosing Check update. If an update is available, click Upload to start firmware
updating.
TITAN can be configured according to your preferences. The most convenient method of the
device's configuration is the GATE Control Station App.
To modify the already saved configuration, run the GCS and click Read. The current
configuration will appear. After choosing the preferred options, click Save.

Gate Titan Specifications

General

MOSFET	Yes
Battery protection	Yes
Trigger sensitivity adjustment	Yes
Pre-cocking	Yes
ROF control	Yes
Active brake	Yes
Diagnostic system	Yes
Programmable	Yes
Cycle Detection	Yes
Compatibility	V2 Gearbox
Low current consumption in sleep mode	0.2mA
Connectivity	USB-Link, Blu-Link
Fire Modes	Semi, Burst
Bluetooth support	Yes