Gate Titan User Guide

41
WWW.GATEE.EU
USER GUIDE
Click button LEFT or RIGHT to switch
options.
Click and hold buttons LEFT or RIGHT
to switch options more quickly.
Before firing, disconnect the
Programming Card and connect the
airsoft gun to the battery.
06
07
ICON ON
BURST MODE
- FULL
BATTERY CELL
- AUTO
ROF CONTROL
- 100%
08
09
10
11
5.2.1 sensors inspection
OFF
RETURN
321 4 5
TRIGGER SENSORS
SELECTOR
SAFE SEMI AUTO
FIRE
FIRE 2
GEAR
All the settings are saved automatically.
Click and hold buttons LEFT and RIGHT to load default settings.
01
02
03
04
05
IMPORTANT: If you have replaced the motor or gears, you must restore factory
settings. The TITAN will adapt cycle detection to the new gearbox configuration.
Click and hold buttons RIGHT and NEXT to restore factory settings. It results in
restoring default settings for all the functions, deleting adaptations and statistical data.
Click and hold button NEXT to switch to
SENSORS display.
T I TA N S E N S O R S a r e d i s p l a y e d o n
corresponding LEDs in real time.
FIRE lights up when the trigger sensors
detect the preselected trigger sensitivity.
FIRE2 lights up when the trigger sensors
det ec t t he p re sel ec ted AU G M O D E
sensitivity (the second stage of trigger).
Click and hold button NEXT to return to the
main settings.

Gate Titan Specifications

General

MOSFET	Yes
Battery protection	Yes
Trigger sensitivity adjustment	Yes
Pre-cocking	Yes
ROF control	Yes
Active brake	Yes
Diagnostic system	Yes
Programmable	Yes
Cycle Detection	Yes
Compatibility	V2 Gearbox
Low current consumption in sleep mode	0.2mA
Connectivity	USB-Link, Blu-Link
Fire Modes	Semi, Burst
Bluetooth support	Yes