1.4 Safety summary
•
•
•
•
•
•
•
•
•
•
08
WWW.GATEE.EU
USER GUIDE
We recommend that this product should be installed by an experienced airsoft service.
Before starting installation process, please ensure that your AEG is empty and there are
no BBs inside.
Caution must be exercised to prevent short circuiting the battery as the consequences
can be very dangerous (fire, battery explosion, burn).
Incorrectly connecting positive and negative battery terminals will cause immediate
damage to the drop-in module what is not covered by the warranty and it can lead to fire,
burn or even battery explosion.
For your own safety, you should install an additional fuse between the battery and the
drop-in module. The fuse should be placed very close to the battery. It will protect the
battery in case of: (1) incorrectly connecting positive and negative battery terminals; (2)
shorting the power cords which connect battery and TITAN; (3) mechanical damage to
the drop-in module.
Do not attempt to connect the battery when the barrel of your AEG is directed toward
you, another person or an animal.
When you use the auto cell detection, ensure that your battery is charged. The cell
number may be incorrectly detected if your battery is discharged.
Before an airsoft game, we suggest to check the most recent configuration and delete
the registered Diagnostic Trouble Codes (DTC).
Prevent the USB-Link and the small end of the cable from contact with conductive
materials (e.g. dust, liquid, metal powder).
Do not store or carry flammable liquids, gases, or explosive materials in the same
compartment as the device, its parts, or accessories.
To Next Page
Loading...
Need help?
General
