52
WWW.GATEE.EU
USER GUIDE
E14
Internal error.
Check 'WHAT DO DO' for E01-E06 or E15 and
perform the same actions.
Displays when errors E01-E06 or E15 are detected.
POSSIBLE REASON: WHAT TO DO:
VIBRATIONS: 1x
E15
Voltage measurement error 2.
1. Clear the DTC and check if the error is detected
again.
2. Contact GATE support team at titan@gatee.eu
POSSIBLE REASON: WHAT TO DO:
NT1
Test E06 was not performed.
POSSIBLE REASON: WHAT TO DO:
Infromation code.
NT2
Test E01 or E02 cannot be performed because the motor is connected to TITAN.
POSSIBLE REASON: WHAT TO DO:
Infromation code. If you want to perform E01 or E02
test, disconnect the motor.
NT3
Test E15 was not performed.
POSSIBLE REASON: WHAT TO DO:
Infromation code.
Does not require any action.
Does not require any action.
Does not require any action.
To Next Page
Loading...
