Gatekeeper Y35 HD v3 - Reset

Y35 HD v3 User Manual & Install Guide
136 of 156
Free/Total
This shows the total storage capacity of the
device, and the remaining free space on it.
Format
Click the (Format) button format the
associated storage device. All data on that
storage device will be erased.
All external drives or SD cards that are used for recording must be:
1. Formatted as N9M (There is a setting to set to N9M or FAT32. N9M MUST be selected) AND
2. The status on ICD/G4Connect must be showing as “Recording”.
For a detailed explanation of formatting external drives or SD Cards, please see To Format to N9M:
To check the recording status of an external drive:
1. Select System Information (Biz Menu)
2. Select Storage
The Status MUST be shown as “Recording”.
6.6.5 Reset
Navigate to: Main Menu → Setup → Maintenance → Reset
This subsection enables you to reset the Y35 HD v3.
Reset
Factory Default Settings
Click the (Reset) button in order to reset all
settings on the device to their factory default
values.
System Reboot
Click the (Reboot) button in order reboot the
device.