Suggested Camera Mounting Locations
Check For:
▪ Ceiling mount recommended.
▪ Do not obstruct walkways.
▪ Avoid contact with abrasive metal to
prevent short circuits.
Wire Routing:
▪ Camera harness to be connected
through opening in base.
▪ Use existing wire paths wherever
possible, e.g. radio, speakers, etc.
▪ Avoid excessively tight bends especially
around metal surfaces.
▪ Always use grommets when routing
through sheet metal holes.
▪ Coil and tie off excess harness or tuck up
into ceiling.
To Next Page
Loading...