Gatekeeper Y35 HD v3 - Page 70

Y35 HD v3 User Manual & Install Guide
70 of 156
Note:
- This setting requires a constant network
connection either via cellular or Wi-Fi.
DEFAULT SETTINGS:
▪ Checkbox – Unselected
DST
Enable
Checkbox – selecting this will enable the device
to calculate and adjust for daylight savings
time.
DEFAULT SETTINGS:
▪ Checkbox – Selected
Offset
Drop list which allows you to choose the offset
value to be used for the daylight savings
calculation:
▪ One Hour (system will offset the time
by an hour when daylight savings is
active)
▪ Two Hours (system will offset the time
by two hours when daylight savings is
active)
DEFAULT SETTINGS:
▪ One Hour
Start
This is a set of fields which allow you to choose
the starting point of the period for which the
device will adjust for daylight savings time.
If the device is adjusting for daylight savings by
Week, you will need to specify the following:
▪ Drop list to choose the start month
(from JAN to DEC).
▪ Drop list to choose the start week
(either 1
ST
, 2
ND
, 3
RD
, 4
TH
or LAST).
▪ Drop list to choose the start day (from
SUNDAY to SATURDAY).
▪ Time field to choose the start time.
If the device is adjusting for daylight savings by
Date, you will need to specify the following:
▪ Date field to set the start date.