Gatekeeper Y35 HD v3 - Page 72

Y35 HD v3 User Manual & Install Guide
72 of 156
▪ Ignition or Timer – device will start
either when vehicle ignition is on, or
when the scheduled time starts.
However, the device will only turn off
when BOTH ignition is off AND
scheduled time ends.
DEFAULT SETTINGS:
▪ Ignition
DVR Power Off Delay
Numeric text field for setting the additional
time period that the device will continue
running after the vehicle ignition is off and the
record extend delay timer has expired. The
device will power down after this timer expires.
DEFAULT SETTINGS:
▪ 600
This means that when the vehicle is turned off,
the device will continue to stay powered for
another 600 seconds (10 Minutes) before
shutting down.
Record Extend Timer
Numeric text field for setting the additional
time period that the device will continue
recording after the vehicle ignition is off.
DEFAULT SETTINGS:
▪ 300
Timer From
This consists of two-time fields to set the start
time and end time for which the device will turn
on and turn off respectively.
Light off time
The ICD display and lights will turn off after the
set time.
DEFAULT SETTINGS:
▪ Never
Sleep
Sleep Mode
Drop list to select the sleep mode option for the
device:
▪ No Consumption Standby