Gatekeeper Y35 HD v3 - Page 76

Y35 HD v3 User Manual & Install Guide
76 of 156
currently set configuration values, and
allow you to modify them.
These configuration values are server
specific. If you have more than one
center server set up, you will need to
select each in turn and configure them
separately.
Add – this button allows you to add a
new center server name and configure its
settings.
Delete – this button deletes the selected
center server and its associated
configuration settings.
Notes:
- You may add up to 5 center servers.
- Server 1 is the default center server
and it cannot be deleted.
DEFAULT SETTINGS:
▪ Server 1
ON
Checkbox – selecting this will mark the
selected server as active.
DEFAULT SETTINGS:
▪ Checkbox – Selected
Protocol Type
Drop list to select the protocol type
option for the selected center server:
▪ N9M
Notes:
- Currently, this is the only option
available.
DEFAULT SETTINGS:
▪ N9M
Enable Network
Drop list to select the network mode
used to communicate with the selected
center server: