Gatekeeper Y35 HD v3 - Page 87

Y35 HD v3 User Manual & Install Guide
87 of 156
Auto Loop
Checkbox – if selected will enable the auto-loop feature.
DEFAULT SETTINGS:
▪ Checkbox – Unselected
Live OSD
Date/Time
Checkbox – if selected, the date and time will be displayed as an overlay
text on top of the live video view on the LCD monitor or ICD2.
DEFAULT SETTINGS:
▪ Checkbox – Selected
Vehicle Plate
Checkbox – if selected, the vehicle Plate will be displayed as an overlay
text on top of the live video view on the LCD monitor or ICD2.
Notes:
- The Vehicle Plate data which the device will display on the OSD is
actually the identifier data which is set in the Basic Setup → Regist
Info → Vehicle Info → Vehicle Plate.
DEFAULT SETTINGS:
▪ Checkbox – Unselected
Alarm/Event
Checkbox – if selected, any alarms will be displayed as an overlay text
on top of the live video view on the LCD monitor or ICD2.
DEFAULT SETTINGS:
▪ Checkbox – Selected
Vehicle Num
Checkbox – if selected, the vehicle num will be displayed as an overlay
text on top of the live video view on the LCD monitor or ICD2.
Notes:
▪ The Vehicle num data which the device will display on the OSD
is actually the identifier data which is set in the Basic Setup →
Regist Info → Vehicle Info → Vehicle num.
DEFAULT SETTINGS:
▪ Checkbox – Selected
Speed
Checkbox – if selected, the speed will be displayed as an overlay text
on top of the live video view on the LCD monitor or ICD2.
DEFAULT SETTINGS:
▪ Checkbox – Unselected