9
Warning Label
Warning Label is written with all the necessary information to be aware of during operation.
Invisible laser radiation when door open and interlock failed.
Avoid eye or skin exposure direct to laser radiation.
Do not leave the machine unattended during operation.
Please clean the bearings and motion system tracks every day.
Do not use reflective metals, heat sensitive surface or materials that may produce toxic substances or corrosion
problems, such as PVC and Teflon.
Laser Path Warning Label
LaserPro machines are very safe under normal use. Furthermore, Laser Path Warning Labels are displayedat the
proximities of possible laser paths as a reminder. Operators should exercise caution when working close to
these laser paths to avoid possible injury while machine is turned on.
Laser Path Danger label
This label indicates the laser path. Normally you can find this label inside of machine. Please be very careful
of this area when you do the maintenance.
To Next Page
Loading...
