67
The following diagram is an example of the raster effects when using the different diffusion types.
Floyd Stucki Jarvis
Tip
There is no "correct" or "best" setting when using the Raster options. The most
appropriate settings will be based on a variety of factors: your design, the
material you are engraving on, the results you wish to achieve, etc. Please take
some time to experiment with the multitude of raster options to get the one you
feel is the best for your piece. This is where much of the fun in engraving is….
experimentation!
Stamp Page
Producing stamps require different operational steps than your standard engraving or cutting jobs.
The
Stamp page offers dynamic options allowing you to customize your stamp production process.
NOTE
The Stamp page will only appear and be accessible when you have selected the
Stamp
Mode from the Options Page.
Tip
Functions located on the other pages that are useful when making a
stamp: Set Shoulder, Pitch, Border, Invert, and Mirror.
To Next Page
Loading...
