7
In compliance with CDRH standards, the required warning labels are affixed at the time of manufacture to the
LaserPro E200 in the appropriate locations. These labels are not to be modified in any way or removed for
any reason. Please familiarize yourself with the specific labels and their locations on the machine. Below is a
list of all the safety labels and their locations on the machine.
Product Label
This label is located at the right-back side of machine. All the product information such as Serial Number,
Model Numbers, Laser Power and Electric power can be found here. Before requiring any tech support,
always provide service person the information on this label.
Safety
Label
CDRH and CE regulations require that all laser manufacturers add warning labels in specific locations throughout
the equipment. The following warning labels are placed on the laser system for your safety. Do not remove these
labels for any reason. If the labels become damaged or have been removed for any reason, do not operate the
laser system and immediately contact Great Computer Cooperation or e-mail us for a replacement.
Door open warning labels
To Next Page
Loading...
