GE Advent User Manual

33
Advent Commercial Fire System
Phone Access Settings
Local Phone Settings
Local phone settings allow you to choose how phones
located on the same premises as the panel interact with the
system.
Minimum Pause Between Rings
17023 (Phone-Advanced Dialog Screen)
(Default = 200 [2000 ms]) Specify the minimum amount of time
allowed between valid rings in 10 millisecond increments (100–
999 x 10 ms).
To set the Minimum Pause Between Rings:
Once the item number has been entered, specify the minimum
time between rings (100–999). Press ƒ to apply the new setting.
Enable Local Phone Access in Partition/Area 1
17085 (Phone Access)
(Default = off) This setting allows you to enable local phone
control in partition/area 1. If on, partition/area 1 may be
controlled by local on premises phones.
To turn Enable Local Phone Access in Partition/
Area 1
On/Off:
Once the item number has been entered, enter 1 to turn this
setting on, or 0 to turn it off. Press ƒ to apply the new setting.
Local Phone Connect Sequence
17056 (Phone Access)
(Default = #*) Enter up to a 4-digit DTMF (touch-tone) sequence
for local control. This is the sequence of numbers the user will
have to enter when accessing the panel locally (on-site)
Format:
 Enter 00–09 for numbers 0-9
 Enter 10 for * (star)
 Enter 11 for # (pound)
To enter Local Phone Connect Sequence:
1. Enter the item number.
2. Enter the sequence using the format above. For example,
if you wanted the sequence to be “12#*,” at the keypad
you would enter “01, 02, 11, 10.”
3. Press
ƒ and the touchpad displays the new sequence.
To delete the Local Phone Connect Sequence:
1. Enter the item number.
2. Enter
0 + ƒ. The touchpad will display NO DATA.
Phone Device Override Sequence
17057 (Phone Access)
(Default = **##) Enter up to a 4-digit DTMF (touch-tone)
sequence for phone device override. This sequence will instruct
the panel to seize the line from the local phone and initiate a
remote connection. Users will be able to enter this sequence and
bypass any phone devices (answering machines, fax machines,
etc.) when calling from a remote phone.
Format:
 Enter 00–09 for numbers 0-9
 Enter 10 for * (star)
 Enter 11 for # (pound)
To enter Phone Device Override Sequence:
1. Enter the item number.
2. Enter the sequence using the format above. For example,
if you wanted the sequence to be “12#*,” at the keypad
you would enter “01, 02, 11, 10.”
3. Press
ƒ and the touchpad displays the new sequence.
To delete Phone Device Override Sequence:
1. Enter the item number.
2. Enter 0 + ƒ. The touchpad will display NO DATA.
Max Delay Between Phone Panic Sequence
17030 (Phone Access)
(Default = 2 seconds) Specify the maximum time allowed (in
seconds) between keystrokes in a phone panic sequence. If this
delay is exceeded, a panic alarm will not be activated.
Setting the Max Delay Between Phone Panic
Sequence:
Once the item number has been entered, enter the maximum delay
(1–5). Press ƒ to apply the new setting.
Local Phone Connect Time
17028 (Phone Access)
(Default = 5 seconds) Specify the maximum time allowed (in
seconds) between local phone off-hook and DTMF seize
sequence for local phone control. If the maximum time is
exceeded, remote phone control will be put on hold.
Setting the Local Phone Connect Time:
1. Once the item number has been entered, enter the maxi-
mum allowable connect time (0–255 [0 = no max time]).
2. Press
ƒ to apply the new setting.

GE Advent Specifications

General

Brand	GE
Model	Advent
Category	Security System
Language	English