GE Advent User Manual

76
Advent Commercial Fire System
Access Codes and Authority Level Settings
Table A.11 shows the default access codes and Table A12
shows default authority level settings. Document any
changes in the tables.
Authority Level Settings
Table A.12 (right) shows default authority level settings.
Document any changes in table.
Table A.11 Default Access Codes
Partition Default Code Authority User #
1 1234 Primary 1
2 2345 Primary 2
3 3456 Primary 3
4 4567 Primary 4
5 5678 Primary 5
6 6789 Primary 6
7 7890 Primary 7
8 8901 Primary 8
Global 2020 Primary 5 or 9*
Installer 0123 Installer 0
* The primary global access code is user #5 in 4 partition systems, and
user #9 in 8 partition systems.
Table A.12 Authority Level Settings Programming
Setting Description
10 Remote Access Allowed
11 Arming to Off Allowed
12 Arming to Home Allowed
13 Arming to Away Allowed
14 Arming to Special Level 4 Allowed 15 Arming to Special Level 5 Allowed
18 Standard Zone Bypassing Allowed
19 Critical Zone Bypassing Allowed
20 Zone Test Allowed
21 Phone Test Allowed
22 Schedule Menu Access Allowed
Programmable Authority
Level Setting*
1
√√√√√√√ √
2
√√√√√√√
3
√√√√√√
4
√√√√√
5
√√√√√
6
√√√√√
7
8
* Factory defaults shown. Write in actual settings.
Primary (prime) authority - of which there is only one per
partition/area is required to assign full and duress authorities.
Primary, full and duress authority levels (not shown) are not
programmable.

GE Advent Specifications

General

Brand	GE
Model	Advent
Category	Security System
Language	English