GE Advent User Manual

62
Advent Commercial Fire System
X-10 Lamp/Appliance Modules
Lights or devices controlled by the X-10 Modules are not working.
1. Check that the light or device is working and the power switch is on.
2. Confirm light or device operation at working outlet.
3. Check that the lights or devices are plugged into X-10 Modules and that the X-10 Modules
are plugged into outlets that are not controlled by a switch. If necessary, relocate modules to
nonswitched outlets.
4. Check that the HOUSE dial on the X-10 Modules match the house code programmed into the
panel.
5. Check for correct X-10 module unit settings and panel programming.
Zones, Loops
(See Hardwire Inputs, Sensors.)
Feature Problem Solution

GE Advent Specifications

General

Brand	GE
Model	Advent
Category	Security System
Language	English