CL-74 Maximum Feedback Level XC-22 Ext. 1 Integral Time XC-64 Ext. 3 Dif. Gain Limit PC-52 Alternation Time Interval LC-43 Logic Rule Operator 2
CL-79 PID Autotuning XC-23 Ext. 1 Differentation Time PC-## Pump Controller PC-53 Alternation Timer Value LC-44 Logic Rule Boolean 3
CL-8# PID Basic Settings XC-24 Ext. 1 Dif. Gain Limit PC-0# System Settings PC-54 Alternation Predefined Time LC-5# States
CL-81 PID Normal/ Inverse
Control XC-3# Ext. CL 2 Ref./Fb. PC-00 Pump Controller PC-55 Alternate if Load < 50% LC-51 Logic Controller Event
CL-82 PID Start Speed [RPM] XC-30 Ext. 2 Ref./Feedback Unit PC-02 Motor Start PC-56 Staging Mode at Alternation LC-52 Logic Controller Action
CL-83 PID Start Speed [Hz] XC-31 Ext. 2 Minimum Reference PC-04 Pump Cycling PC-58 Run Next Pump Delay B-## Braking Functions
CL-84 On Reference Bandwidth XC-32 Ext. 2 Maximum Reference PC-05 Fixed Lead Pump PC-59 Run on Line Delay B-0# DC Brake
CL-9# PID Controller XC-33 Ext. 2 Reference Source PC-06 Number of Pumps PC-8# Status B-00 DC Hold Current
CL-91 PID Anti Windup XC-34 Ext. 2 Feedback Source
PC-10 Minimum Run Time
Override PC-80 Pump Status B-01 DC Brake Current
CL-93 PID Proportional Gain XC-35 Ext. 2 Setpoint
PC-11 Minimum Run Time
Override Value PC-81 Pump Status B-02 DC Braking Time
CL-94 PID Integral Time XC-37 Ext. 2 Reference [Unit] PC-2# Bandwidth Settings PC-82 Lead Pump B-03 DC Brake Cut In Speed [RPM]
CL-95 PID Differentiation Time XC-38 Ext. 2 Feedback [Unit] PC-20 Staging Bandwidth PC-83 Relay Status B-04 DC Brake Cut In Speed [Hz]
CL-96 PID Diff. Gain Limit XC-39 Ext. 2 Output [%] PC-21 Override Bandwidth PC-84 Pump ON Time B-1# Brake Energy Funct.
XC-## Ext. PID Closed-loop XC-4# Ext. CL 2 PID PC-22 Fixed Speed Bandwidth PC-85 Relay ON Time B-10 Brake Function
XC-0# Ext. CL Autotuning XC-40 Ext. 2 Normal/Inverse Control PC-23 SBW Staging Delay PC-86 Reset Relay Counters B-16 AC brake Max. Current
XC-00 Closed Loop Type XC-41 Ext. 2 Proportional Gain PC-24 SBW Destaging Delay PC-9# Service B-17 Over-voltage Control
XC-01 PID Performance XC-42 Ext. 2 Integral Time PC-25 OBW Time PC-90 Pump Interlock
XC-02 PID Output Change XC-43 Ext. 2 Differentation Time PC-26 Destage At No-Flow PC-91 Manual Alternation
XC-03 Minimum Feedback Level XC-44 Ext. 2 Dif. Gain Limit PC-27 Stage Function LC-## Logic Controller
XC-04 Maximum Feedback Level XC-5# Ext. CL 3 Ref./Fb. PC-28 Stage Function Time LC-0# LC Settings
XC-09 PID Autotuning XC-50 Ext. 3 Ref./Feedback Unit PC-29 Destage Function LC-00 Logic Controller Mode
XC-1# Ext. CL 1 Ref./Fb. XC-51 Ext. 3 Minimum Reference PC-30 Destage Function Time LC-01 Start Event
XC-10 Ext. 1 Ref./Feedback Unit XC-52 Ext. 3 Maximum Reference PC-4# Staging Settings LC-02 Stop Event
XC-11 Ext. 1 Minimum Reference XC-53 Ext. 3 Reference Source PC-40 Decel Ramp Delay LC-03 Reset Logic Controller
XC-12 Ext. 1 Maximum Reference XC-54 Ext. 3 Feedback Source PC-41 Accel Ramp Delay LC-1# Comparators
XC-13 Ext. 1 Reference Source XC-55 Ext. 3 Setpoint PC-42 Staging Threshold LC-10 Comparator Operand
XC-14 Ext. 1 Feedback Source XC-57 Ext. 3 Reference [Unit] PC-43 Destaging Threshold LC-11 Comparator Operator
XC-15 Ext. 1 Setpoint XC-58 Ext. 3 Feedback [Unit] PC-44 Staging Speed [RPM] LC-12 Comparator Value
XC-17 Ext. 1 Reference [Unit] XC-59 Ext. 3 Output [%] PC-45 Staging Speed [Hz] LC-2# Timers
XC-18 Ext. 1 Feedback [Unit] XC-6# Ext. CL 3 PID PC-46 Destaging Speed [RPM] LC-20 Logic Controller Timer
XC-19 Ext. 1 Output [%] XC-60 Ext. 3 Normal/Inverse Control PC-47 Destaging Speed [Hz] LC-4# Logic Rules
XC-2# Ext. CL 1 PID XC-61 Ext. 3 Proportional Gain PC-5# Alternation Settings LC-40 Logic Rule Boolean 1
XC-20 Ext. 1 Normal/Inverse
Control XC-62 Ext. 3 Integral Time PC-50 Lead Pump Alternation LC-41 Logic Rule Operator 1
XC-21 Ext. 1 Proportional Gain XC-63 Ext. 3 Differentation Time PC-51 Alternation Event LC-42 Logic Rule Boolean 2
Table 5.9
About Programming AF-600 FP Design and Installation Guide
5-12 DET-768A
5
To Next Page
Loading...
