GE AKTA avant - 5 Prepare the System for a Run

5 Prepare the system for a run
About this chapter
This chapter describes the preparations necessary before starting a run.
In this chapter
This chapter contains the following sections:
See pageSection
1045.1 Before you prepare the system
1065.2 Prepare the flowpath
1115.3 Prime buffer inlets and purge system pumps
1125.4 Connect a column
1175.5 Set pressure alarms
1195.6 Calibrate the pH monitor
1215.7 Prepare the built-in fraction collector
1285.8 Prepare for a run at cold temperature
ÄKTA avant Operating Instructions 29101556 AB 103
5 Prepare the system for a run