1.3.4 Other regulations and standards
Introduction
This section describes the standards that apply to the ÄKTA avant system.
Environmental conformity
This product conforms to the following environmental requirements.
TitleRequirement
Waste Electrical and Electronic Equipment (WEEE) Directive2012/19/EU
Management Methods for the Restriction of the Use of Haz-
ardous Substances in Electrical and Electronic Products.
China RoHS
Standards, machinery and
electrical equipment
Standard requirements fulfilled by this product are summarized in the table below.
DescriptionStandard
Safety of machinery. General principles for design. Risk
assessment and risk reduction.
EN ISO 12100
Safety requirements for electrical equipment for mea-
surement, control, and laboratory use - Part 1: General
requirements.
EN 61010-1, IEC 61010-1,
UL 61010-1, CAN/CSA-
C22.2 No. 61010-1
Electrical Equipment for Measurement, Control, and
Laboratory Use-EMC requirements-Part 1: General re-
quirements
EN 61326-1
(Emission according to CISPR 11, Group 1, class A)
Industrial, Scientific and Medical (ISM) Radio Frequency
Generators (Canada)
ICES-001/NMB-001
12 ÄKTA avant Operating Instructions 29101556 AB
1 Introduction
1.3 Regulatory information
1.3.4 Other regulations and standards
To Next Page
Loading...
