4 Installation
About this chapter
This chapter provides the instructions necessary to enable users and service personnel
to install the instrument and the software.
Read the entire Installation chapter before starting to install the ÄKTA avant instrument.
For information on how to how to unpack the ÄKTA avant instrument and how
to lift the instrument onto a laboratory bench see ÄKTA avant Unpacking In-
structions.
Note:
In this chapter
This chapter contains the following sections:
See pageSection
524.1 Site preparation
664.2 Hardware installation
814.3 Software installation
824.4 Start UNICORN and connect to system
854.5 Prime inlets and purge pump heads
1024.6 Performance tests
ÄKTA avant Operating Instructions 29101556 AB 51
4 Installation
To Next Page
Loading...
