GE AKTA avant - Prepare the Built-In Fraction Collector

5.7 Prepare the built-in fraction collector
Introduction
This section describes how to prepare the built-in fraction collector. For detailed informa-
tion regarding the types of deep well plates, tubes and cassettes, see ÄKTA avant User
Manual.
WARNING
Fraction collector. Do not fractionate flammable liquids in the
built-in fraction collector. When running RPC methods, collect
fractions through the outlet valve or the optional external Fraction
collector F9-R.
Available cassettes, trays and
racks
The following Cassettes and racks are available:
•
Cassette 3 ml tubes (for 40 tubes)
•
Cassette 5 ml tubes (for 40 tubes)
•
Cassette 8 ml tubes (for 24 tubes)
•
Cassette 15 ml tubes (for 15 tubes)
•
Cassette 50 ml tubes (for 6 tubes)
•
Cassette for deep well plate (24, 48, 96 wells)
•
Cassette tray (for six cassettes)
•
Rack for 50 ml tubes (for 55 tubes)
•
Rack for 250 ml bottles (for 18 bottles)
ÄKTA avant Operating Instructions 29101556 AB 121
5 Prepare the system for a run
5.7 Prepare the built-in fraction collector