6.1 Before you start
Introduction
Before starting a run, it is necessary to read and understand the information in this
section and to perform the checks listed in the next topic.
WARNING
•
Always use appropriate Personal Protective Equipment (PPE)
during operation and maintenance of this product.
•
Hazardous substances. When using hazardous chemicals,
take all suitable protective measures, such as wearing protec-
tive clothing, glasses and gloves resistant to the substances
used. Follow local and/or national regulations for safe opera-
tion and maintenance of the product.
•
High pressure. The product operates under high pressure.
Wear protective glasses and other required Personal Protective
Equipment (PPE) at all times.
Checklist
Make sure that the system is correctly prepared:
•
Prepare the system according to the settings in the method to be run.
•
Select a suitable column for the application.
•
Immerse the buffer inlet tubing in correct buffer vessels.
•
Immerse all waste tubing in appropriate waste vessels (consider vessel size, placement
and material).
•
Verify that no tubing is twisted and that the flow path is free from leakage.
130 ÄKTA avant Operating Instructions 29101556 AB
6 Run a method
6.1 Before you start
To Next Page
Loading...
