GE AKTA avant - Prepare Waste Tubing

4.2.3 Prepare waste tubing
Location of waste tubing
All waste tubing is found on the rear of the instrument, see the following illustration.
1
2
DescriptionPart
Waste tubing from the injection valve, the pH valve and the outlet valve
(pieces of tubing marked W, W1, W2 and W3).
1
Waste tubing from the fraction collector and the buffer tray.2
ÄKTA avant Operating Instructions 29101556 AB 73
4 Installation
4.2 Hardware installation
4.2.3 Prepare waste tubing