GE AKTA avant - Page 164

Required material
The following materials are required:
•
Adjustable wrench
•
Star screwdriver, T20
•
Cross-headed screwdriver
•
Hex wrench
•
Ultrasonic bath
•
Ethanol, 20%
•
Reference capillary Ref 1
•
P9-S Seal kit, 65 ml
Illustration
The illustration below shows the parts of the pump heads of Pump P9-S.
1 2 3
4
5
10
87
9
6
DescriptionPartDescriptionPart
Piston seal6Piston1
Outlet check valve7Return spring2
O-ring8Drain plate3
Purge valve9Rinse membrane4
Inlet check valve10Rinse chamber5
164 ÄKTA avant Operating Instructions 29101556 AB
7 Maintenance
7.3 Replace pump piston seal, O-ring, and rinse membrane of Pump P9-S