WARNING
•
Electrical shock hazard. All repairs should be done by service
personnel authorized by GE. Do not open any covers or replace
parts unless specifically stated in the user documentation.
•
Disconnect power. Always disconnect power from the instru-
ment before replacing any component on the instrument, un-
less stated otherwise in the user documentation.
•
Corrosive chemicals during maintenance. If the system or
column is cleaned with a strong base or acid, flush with water
afterwards and wash with a weak neutral buffer solution in
the last step or phase.
NOTICE
To avoid damage to the ÄKTA avant instrument or other
equipment when performing maintenance on the ÄKTA avant
instrument, follow these instructions.
•
Cleaning. Keep the exterior of the instrument dry and clean.
Wipe regularly with a soft damp tissue and, if necessary, a mild
cleaning agent. Let the instrument dry completely before use.
•
Advanced maintenance. Read the instruction carefully before
disassembly of the pump head.
26 ÄKTA avant Operating Instructions 29101556 AB
2 Safety Instructions
2.1 Safety Precautions
To Next Page
Loading...
