then...If you want
to...
•
Push the Power switch to the O position,
or
•
disconnect the power cord from the wall socket.
Result: The run is interrupted immediately.
Note:
The sample and data may be lost as a result of switching off the
power.
switch off the
instrument
Power failure
The result of a power failure depends on which unit is affected.
will result in...Power failure to...
•
The run is interrupted immediately
•
Data collected up to approx. 5 seconds before
the power failure is available in UNICORN.
ÄKTA avant instrument
•
The UNICORN computer shuts down
•
The instrument display shows status Not
connected
•
The run is interrupted immediately
•
Data generated up to 10 seconds before the
power failure can be recovered
Note:
The UNICORN client may lose connection to the
instrument during a temporary overload of the
processor and display an error message. This
may appear as a computer failure. The run
continues and you can restart the UNICORN
client to regain control. No data will be lost.
Computer
ÄKTA avant Operating Instructions 29101556 AB 31
2 Safety Instructions
2.3 Emergency procedures
To Next Page
Loading...
