If the tubing is too short, replace it with new tubing. Do not lengthen the tubing
as this might cause obstruction of the tubing and flooding in the fraction col-
lector chamber.
Note:
CAUTION
Make sure that the waste vessels will hold all the produced volume
of the run. For ÄKTA avant 25, a suitable waste vessel should typi-
cally have a volume of 2 to 10 liters. For ÄKTA avant 150, a waste
vessel should have a volume of 40 liters.
ÄKTA avant Operating Instructions 29101556 AB 75
4 Installation
4.2 Hardware installation
4.2.3 Prepare waste tubing
To Next Page
Loading...
