APPENDIX D: USING CONFIGPRO WITH D20MX
D20MX INSTRUCTION MANUAL GE INFORMATION 135
4. Navigate to the D20M prompt; this is called a SHELL prompt - an equivalent of the 68K
monitor prompt.
5. Press the Enter key a couple of time to display and confirm the required prompt; that
is, D20M.
6. Type sp to suspend the processor, then type dl to download and press Enter.
7. The D20MXDEVICE.SHX file located in the project directory below can simply be
dragged and dropped in the Tera term window.
To Next Page
Loading...
