APPENDIX D: USING CONFIGPRO WITH D20MX
D20MX INSTRUCTION MANUAL GE INFORMATION 141
6. Under the D20MX Factory Default Configuration Files section, click on the link
named ConfigPro.
Result: The Factory Default Configuration Files folder appears.
7. Using Windows Explorer, copy/paste the files as shown in the following table. To copy
a file, select it and press Ctrl-C. To paste a file, click on the Windows Explorer window
showing the new D20MXV13X folder and press Ctrl-V.
Result: The files shown in the above table appear in the new D20MXv13X folder of the
Windows Explorer window.
Installing application definitions: archived
To install the application definitions:
1. From ConfigPro, initiate the Application Installer by selecting Tools > Application
Installer.
Result: The ConfigPro Application Installer - Welcome window appears.
Navigate to folder on D20MX Documentation CD
or Folder extracted from Zip File
Copy/Paste the following files to the
new folder
D20MXV13X
MX01-13X.zip MX01-13X.zip
MX02-13X.zip MX02-13X.zip
To Next Page
Loading...
Need help?
General
