GE Dash 4000 Operator's Manual

C-4 Dash™ 3000/4000/5000 2000966-386D
Factory Defaults
Parameter Limits
The following are the parameter alarm limit factory defaults. To access these options,
select MORE MENUS > MONITOR SETUP > MONITOR DEFAULTS > SETUP
DEFAULT LIMITS.
ADULT-ICU NEONATAL-ICU OPERATING ROOM
LOW HIGH LOW HIGH LOW HIGH
HR 50 150 90 200 –1 150
PVC/MIN — 6 — 6 — 6
ST-I
–2.0 2.0 –2.0 2.0 –2.0 2.0
ST-II
ST-III
ST-V1
ST-AVL
ST-AVF
ST-AVR
ST-V2
ST-V3
ST-V4
ST-V5
ST-V6
NBP-S 80 200 40 100 40 200
NBP-D 20 120 20 60 20 120
NBP-M 40 140 30 70 40 140
ART-S 80 200 40 100 40 200
ART-D 20 120 20 60 20 120
ART-M 40 140 30 70 40 140
ART-R 50 150 90 200 –1 150
FEM-S 80 200 40 100 40 200
FEM-D 20 120 20 60 20 120
FEM-M 40 140 30 70 40 140
FEM-R 50 150 90 200 –1 150
UAC-S 80 200 40 100 40 200
UAC-D 20 120 20 60 20 120
UAC-M 40 140 30 70 40 140

GE Dash 4000 Specifications

General

Resolution	640 x 480 pixels
Power Supply	100-240 VAC, 50/60 Hz
ECG	3/5/12-lead
IBP	Up to 4 channels
Battery Backup	Yes
Certifications	CE, UL, CSA
Parameters Monitored	ECG, SpO2, NIBP, IBP, Temperature, Respiration, Cardiac Output
Connectivity	Ethernet, USB, Serial
Display Type	TFT LCD
Recorder	Integrated thermal printer
Battery Type	Lithium-ion
Operating Temperature	0 to 40°C
Storage Temperature	-20 to 60°C
Humidity Range	15% to 95% non-condensing
Display Size	10.4 inches
Cardiac Output	Available