30
K0320 Issue No. 1
Date and Time Settings
The MCX-II has been equipped with an
internal clock: to indicate how many
days are left before last calibration
expires and to record date and time
on the memory card. The clock has
been factory set to Paris time at the
date of calibration.
Setting the clock to your local time
Leave the cursor at NONE at the
INPUT and OUTPUT menu and press
the # key to open the set-up menu.
Select TIME. Press EXE again. Enter
the local time. Press EXE to accept
new time or press CE to leave the set-
up menu.
Set-up
To Next Page
Loading...
