98
K0320 Issue No. 1
Power supplies available for the user
are designed to power transmitters,
control and transducer wheatstone
bridges. The following power supplies
are available at the terminals as
indicated:
24 VDC fixed, combined with the
mA input terminals, current limited at
32 mA.
24 VDC fixed, combined with the
mA output terminals, current limited
at 32 mA.
0-24 VDC adjustable, combined with
the frequency output terminals.
Resolution is 0.1 Volt. With frequency
set at 0 Hz, output becomes available
as a voltage adjustable and regulated
power supply.
Current limited at 34 mA.
User Power supplies
To Next Page
Loading...
