12
K0320 Issue No. 1
Parts identification
1 POWER switch
Switch to put the calibrator
"ON" and "OFF".
2 CHG. (amber LED) charging
indicator
On when batteries are charged.
The indicator should not light
when non-rechargeable
batteries are installed.
3 EXT. (green LED) external
power indicator
On when calibrator is powered
from the optional line
adaptor/charger #13603.
4 EXT. POWER INPUT
Connector for external
power source.
Only suitable for optional line
adaptor/charger #13603.
5 Battery compartment cover
Release screws to get access
to batteries.
6 Battery selector switch
To select Alkaline or
Rechargeable batteries.
Remove protective sticker to
get access to the switch.
IMPORTANT:
Switch position
must comply with installed battery
type.
Functionallity
To Next Page
Loading...
