84
K0320 Issue No. 1
Frequency range 0-20 kHz
Go to pulse DIRECT mode to output any
pulse signal between zero and 20.000 Hz.
Adjustments are made with 1 Hz resolution.
Frequency range 0-6000 P./Min.
Same as 0-100 Hz but reads in
Pulses/Minute
Pulse output range
0 - 99 999 P./Hour
Same as 0-100 Hz but reads in
Pulses/Hour
Counter
Go to the pulse PRESET mode and
set the amplitude. Press EXE to proceed
to the working screen. Use the and
keys to move the cursor from upper to
lower line and vice versa. Fill out the
number of pulses to be transmitted as
well as the Baud rate (max. 18 000
pulses/seconds). Press EXE to start the
pulse transmission.
Output of electrical signals
To Next Page
Loading...
