100
K0320 Issue No. 1
Transmitter calibration
In this function transmitter source and
measure readings are both scaled in
engineering units for quick comparison.
Transmitter may be a linearized, non-
linearized, 4-20 or 0-20 mA model for
thermocouples or RTD’s.
Setting up a calibration
Leave the cursor on NONE in the
input menu and select the required
output function.
Go through the menu and make the
selections as required. In the mode
screen, select CAL to calibrate a
transmitter. Proceed to select all
transmitter characteristics.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com
To Next Page
Loading...
