78
K0320 Issue No. 1
Millivolts
Go to millivolts in the DIRECT mode to
output any signal between -10 mV and
100 mV. Adjustments are made with
1 microvolt resolution.
If the adjusted output level cannot be
maintained the screen will prompt the
warning CHECK LOOP.
NOTE:
‘Terminal to test lead’
junctions may create e.m.f.
microvolts causing an offset in the
actual output signal.
Millivolts output
Millivolt Geben
Sortie millivolts
Output of electrical signals
To Next Page
Loading...
