18
K0320 Issue No. 1
Screens to work with
The MCX-II has four types of screen
display to work with:
• Menu Selection Screen
Offers selection of choices. Move
cursor with arrow keys to your choice.
• Set up Screen
Move cursor with arrow keys to fill in
the blanks.
• Working Screen
Displays readings of measured and
generated values. Output or simulated
temperatures are set with the
numerical key-pad or can be ramped up
and down in different ways.
NOTE:
After switching the calibrator
on, the screen will show:
• Serial Serial Number
• Firmware Firmware version
• Hart Hart Firmware
version
• Battery voltage/switch position
• Days left to next calibration
Functionallity
To Next Page
Loading...
