GE F60 - Page 425

GE Multilin F60 Feeder Protection System 5-293
5 SETTINGS 5.8 INPUTS/OUTPUTS
5
b) LOCAL DEVICES: ID OF DEVICE FOR TRANSMITTING GSSE MESSAGES
In a F60 relay, the device ID that represents the IEC 61850 GOOSE application ID (GoID) name string sent as part of each
GOOSE message is programmed in the SETTINGS  PRODUCT SETUP  COMMUNICATIONS  IEC 61850 PROTOCOL 
GSSE/GOOSE CONFIGURATION  TRANSMISSION  FIXED GOOSE  GOOSE ID setting.
Likewise, the device ID that represents the IEC 61850 GSSE application ID name string sent as part of each GSSE mes-
sage is programmed in the SETTINGS  PRODUCT SETUP  COMMUNICATIONS  IEC 61850 PROTOCOL  GSSE/GOOSE
CONFIGURATION  TRANSMISSION  GSSE  GSSE ID setting.
In F60 releases previous to 5.0x, these name strings were represented by the
RELAY NAME setting.