GE LOGIQ P5 Basic OB User Manual

GE HEALTHCARE
DIRECTION 5394141, REVISION 5 LOGIQ™ P5 SEVICE MANUAL
5-58 Section 5-12 - Machine RFS
5-12-2 Enabling MRFS (cont’d)
8.) check the checkbox next to the name to set to the default contact. Then Press “Set Default Machine
Contact” button,
9.) Now the MRFS is enabled.
10.)When system detects high temperature or abnormal voltage, the system will send the RFS to the
OLC automatically.
Figure 5-62 Set Default Machine Contact

GE LOGIQ P5 Basic OB Specifications

General

Brand	GE
Model	LOGIQ P5 Basic OB
Category	Medical Equipment
Language	English